Accurately controls terrarium temperatures Ideal for use with Heat Mats and Heat Cables From 20°C up to 35°C (68°F – 95°F) Waterproof remote sensor Controls heating devices up to 100 W/ 300 W Recessed temperature setting to avoid accidental setting or tampering Waterproof remote sensor with 6 foot / 185cm probe cord Red LED heat indicator shows when heating element is ON Can be used with the following Exo Terra heating sources: Heat Mat - Heat Cable - Ceramic Heater Reptiles are ectotherm, and use heat from an external source to thermoregulate their optimal body temperature. Most reptiles use direct radiant heat from the sun in combination with conductive heat from sun-heated surfaces such as branches, rocks or other heat accumulating structures. Providing such an appropriate, species related, temperature gradient in the terrarium is an important factor in successful reptile keeping. With the Exo Terra 100 W/ 300 W Electronic ON/OFF Thermostat you can create a well controlled heating system that allows you to maintain the required temperature conditions similar to those found in a desert or tropical environment. The Thermostat will also help to prevent overheating and undercooling during hot summer days or cold winter nights. The electronic Triac switch keeps the temperature at the desired setpoint with a much higher accuracy compared to conventional thermostats and virtually eliminates temperature swings in the terrarium. Simply connect your Heat Mat, Heat Cable or Ceramic Heater to the Exo Terra ON/OFF Thermostat, set the preferred temperature and place the heat sensor in the desired spot. The Red LED heat indicator will light up when the heating device is ON and will shut off once the desired temperature has been reached. The recessed dial of the thermostat will prevent accidental temperature change if the device is being handled. The waterproof remote sensor can be safely used in highly moist terrariums and aquatic environments. The Exo Terra Thermostat should be set according to the needs of the animals. Thoroughly research the preferred optimum temperature range (POTR) for your specific reptile, so you can create the correct temperature gradients inside the terrarium to allow your reptiles to thermoregulate.

Habistat Dimmer Thermostat The Habistat dimmer thermostat is one of the most popular and versatile dimming thermostats for reptiles sold in the UK Dimming thermostats are primarily used to control light bulbs, but can also be used for controlling ceramic lamps, deep heat projectors and other heat sources over 40w The Habistat Dimmer thermostat is accurate, reliable and super simple to operate: Easy Adjust Dial Temperature Control Available in either standard range (16-34C) or high range (26-40C). High Range has now sold out - please consider purchasing the upgraded model here. 12 month warranty The Habistat Dimming Thermostat is one of the most accurate methods of temperature control and whilst it is perfect for controlling light bulbs, it can be used on almost any heaters. Unlike other HabiStat Thermostats, it does require a minimum load of 40 watts, but has a maximum capacity of 600 watts at 230 volts. We only recommend this thermostat for use with incandescent light bulbs. It uses the latest technology and operates in a manner similar to the Pulse Proportional Thermostat. Instead of pulses of power being supplied to the heater, it is supplied with a continuous variable supply of power or voltage. In principle this has a similar effect to light dimmers or rheostats in your home.

- Suitable for Heat Mats, Heaters and Fans- Available in Standard and Day/Night- ON/ Off temperature cycle adjustable between 0.1°C and 5°C- Continual readout of current temperature and time- Separate timed circuit to control heaters, lighting, fans or spray systems.- Separate setting of day and night time temperatures (Day/Night)- Two separately timed circuits (Day/Night)- Thermostat User Guide available.- Comes with a 12-month guarantee.

Digitally controlled thermostat offering Microclimate's HD Dimming technology. The software developed over years allows Microclimate Dimmers to dim extremely smoothly. This aids in the least disruption for your animal and the ultimate in temperature control. Dimmer B1 can control any type of heat source whether it be light emitting or non light emitting. The same precise temperature control will be maintained.​ No minimum load is required for Microclimate Dimming thermostats. So the Dimmer B1 is a real all rounder when it comes to controlling your heating requirements. Only the best electrical components go into building your Dimmer B1 and it is completely designed and manufactured in house in the United Kingdom. This allows our high standards to be maintained throughout software and manufacture. Control up to 600w of heaters from the Dimmer B1. A recessed temperature control dial prevents any accidental changes to the set temperature so you can be certain that the temperature remains at the set point that you require. Built in diagnostics are constantly running to ensure that your thermostat is running trouble free. With a temperature range of 19c to 35c the Dimmer B1 (Standard) has you covered for a wide range of reptiles. With a temperature range of 29c to 45c the Dimmer B1 High Temperature can cater for those reptiles who like higher temps. the Dimmer B1 High Temperature can cater for those reptiles who like higher temps. IP Rated waterproof sensor to ensure accurate temperature readings no matter the conditions.

404 Not Found

The Microclimate EVO Connected Thermostat is one of the reptile markets most exciting and highly anticipated products in years and is set to take reptile keeping to a whole new level. In summary this thermostat has it all.. Multiple channels to control heating and lighting and monitor temperatures Timing modes (per channel) Simple: Constant or Day & Night Advanced: Multi 8 Settings, Periodic, Seasons All new high quality, colour, capacitative touch screen with large easy to read display IP Rated waterproof sensor on every channel (2.5m cables) Seasons Mode allows the recreation of a whole years environmental cycle Ramp Times: control the length of time between temp changes for more natural climate control Power output level shown per channel Visual and Audible Alarms Real time fault detection Built in mounting solution for both the display and main control box allowing for easy, secure installation Customise channel and thermostat names Single Cable to the display allowing other cables to be kept out of sight with the main control box Wifi Connectivity allowing real time monitoring and control of your enclosures from anywhere in the world (via iOs or android apps) Web Browser remote dashboard Cloud connectivity with 12 months of data logging for each channel on the app Push notifications if an alarm is triggered, there is a power cut or your thermostat goes offline Over the air updates included to keep your thermostat up to date Generate reports for your whole collection and export the data to csv file View multiple thermostats on one app (note wifi is needed for app or cloud features) 1200w max load (600w max per channel) Designed and manufactured in the United Kingdom Full 5 Year Warranty Evo Connected 2 Channel 1: Pulse/Dimming Channel 2: On/Off This model is perfect for a vivarium with a single heat source (e.g. a basking light or ceramic bulb) and a separate UVB lighting system (e.g. a UVB light source). In this scenario you would get complete automation of the day and night cycles and temperature readings on both sensors, allowing you to simultaneously record temperatures in two different areas of the vivarium. The second channel can also be used as an on/off thermostat if preferred. Evo Connected 3 Channel 1: Pulse/Dimming Channel 2: Pulse/Dimming Channel 3: On/Off If your vivarium has two heat sources, this model is for you. Our favourite use will be the ability to run a secondary nighttime or background heater within the enclosure and control it with the same thermostat.

Habistat Dimmer Thermostat The Habistat dimmer thermostat is one of the most popular and versatile dimming thermostats for reptiles sold in the UK Dimming thermostats are primarily used to control light bulbs, but can also be used for controlling ceramic lamps, deep heat projectors and other heat sources over 40w The Habistat Dimmer thermostat is accurate, reliable and super simple to operate: Easy Adjust Dial Temperature Control Available in either standard range (16-34C) or high range (26-40C). High Range has now sold out - please consider purchasing the upgraded model here. 12 month warranty The Habistat Dimming Thermostat is one of the most accurate methods of temperature control and whilst it is perfect for controlling light bulbs, it can be used on almost any heaters. Unlike other HabiStat Thermostats, it does require a minimum load of 40 watts, but has a maximum capacity of 600 watts at 230 volts. We only recommend this thermostat for use with incandescent light bulbs. It uses the latest technology and operates in a manner similar to the Pulse Proportional Thermostat. Instead of pulses of power being supplied to the heater, it is supplied with a continuous variable supply of power or voltage. In principle this has a similar effect to light dimmers or rheostats in your home.

The Microclimate EVO Connected Thermostat is one of the reptile markets most exciting and highly anticipated products in years and is set to take reptile keeping to a whole new level. In summary this thermostat has it all.. Multiple channels to control heating and lighting and monitor temperatures Timing modes (per channel) Simple: Constant or Day & Night Advanced: Multi 8 Settings, Periodic, Seasons All new high quality, colour, capacitative touch screen with large easy to read display IP Rated waterproof sensor on every channel (2.5m cables) Seasons Mode allows the recreation of a whole years environmental cycle Ramp Times: control the length of time between temp changes for more natural climate control Power output level shown per channel Visual and Audible Alarms Real time fault detection Built in mounting solution for both the display and main control box allowing for easy, secure installation Customise channel and thermostat names Single Cable to the display allowing other cables to be kept out of sight with the main control box Wifi Connectivity allowing real time monitoring and control of your enclosures from anywhere in the world (via iOs or android apps) Web Browser remote dashboard Cloud connectivity with 12 months of data logging for each channel on the app Push notifications if an alarm is triggered, there is a power cut or your thermostat goes offline Over the air updates included to keep your thermostat up to date Generate reports for your whole collection and export the data to csv file View multiple thermostats on one app (note wifi is needed for app or cloud features) 1200w max load (600w max per channel) Designed and manufactured in the United Kingdom Full 5 Year Warranty Evo Connected 2 Channel 1: Pulse/Dimming Channel 2: On/Off This model is perfect for a vivarium with a single heat source (e.g. a basking light or ceramic bulb) and a separate UVB lighting system (e.g. a UVB light source). In this scenario you would get complete automation of the day and night cycles and temperature readings on both sensors, allowing you to simultaneously record temperatures in two different areas of the vivarium. The second channel can also be used as an on/off thermostat if preferred. Evo Connected 3 Channel 1: Pulse/Dimming Channel 2: Pulse/Dimming Channel 3: On/Off If your vivarium has two heat sources, this model is for you. Our favourite use will be the ability to run a secondary nighttime or background heater within the enclosure and control it with the same thermostat.

HabiStat Classic Pro Pulse Proportional Thermostat – Black (450 Watt) Precise pulse‑proportional control designed for non‑light emitting heat sources up to 450W. ✔️ Pulse‑proportional power delivery for consistent temperature stability and reduced thermostat cycling ✔️ Supports up to 450W load — ideal for ceramic heaters, heat mats, and cables ✔️ LCD display & detachable probe for easy monitoring and placement ✔️ Safety features: over-/under‑temperature alarms and fast‑blow fuse ✔️ Supported temperature range: up to 50 °C ✔️ 12‑month guarantee included The Classic Pro Pulse Thermostat delivers advanced thermal control by quickly pulsing power to maintain stable temperatures — avoiding overshooting typical of on/off systems. It's perfect for reptile setups requiring precision heating without using basking bulbs or light sources. Why Choose Pulse Proportional? Unlike simple on/off thermostats, pulse proportional systems modulate power delivery, resulting in smoother, more efficient temperature control. The unit adjusts the percentage of time the heater is on to achieve your target temperature with minimal fluctuation. Coverage Perfect for species requiring reliable nighttime or substrate heating—such as leopard geckos, bearded dragons using ceramic heaters, boas, pythons, and other medium‑to‑large reptiles. Important Notes ⚠️ Not compatible with light‑emitting sources like heat lamps or basking bulbs ⚠️ Ensure proper probe placement to maintain accurate temperature reading Backed by HabiStat quality and tested performance — a smart upgrade over basic on/off thermostats.

Compact, Mighty and packed full of digital technology. The big brother to the Ministat, the Ministat 600 has all the same great specs but with an increased maximum power output of 600w. Remember there is NO minimum load, so its just as good at controlling lower powered heaters as the ministat 100. The Ministat has been a standard in the reptile industry for many years. ​​ The Ministat 600 ticks all the boxes as an affordable temperature control soloution for your reptile. On/Off temperature control is suitable for all types of heaters due to the temperature swing either side of the set point. Control up to 600w of heaters from the one compact unit. ​ High quality digital processesing combined with software developed and tested over many years ensures we are confident that the Ministat 600 is a device you can trust. A recessed temperature control dial prevents any accidental changes to the set temperature so you can be certain that the temperature remains at the set point that you require. With a temperature range of 19c to 35c the Ministat 600 has you covered for a wide range of reptiles. sensor.png IP Rated waterproof sensor ensures accurate temperature readings no matter the conditions.

The Microclimate Ministat 100 thermostat is the perfect combination of value and reliability. With an industry leading 5 year warranty, the ministat 100 is the perfect reptile thermostat to control heat mats or other (non light emitting) heaters up to a maximum of 100w.